Segway SE-3 Patroller User Manual download pdf (Page 61)

Info SE-3 Setup Operate Riding

Tips

Battery Maintain T-shoot Warn Contact

Index Schedule

Tires and Wheels

WARNING

Recommended tire pressures are shown on Wheel labels afﬁxed near the valve

stems. These pressures supersede any recommended pressures stated on

the Tires. Higher pressure reduces suspension performance and traction, and

increases risk of loss of control, collisions, and falls. Lower pressure reduces

range and increases risk of damage to the Tire/ Wheel Assembly. Unequal

pressure will cause the Segway SE-3 Patroller to turn in the direction of the

lower pressure tire.

WARNING

Brake discs can become very hot during aggressive use. Let the brake system

cool down before performing any Tire/Wheel maintenance, to avoid the

possibility of burns.

Checking the Tire/Wheel Assembly

To check the Tires and Wheels:

1. Make sure the SE-3 Patroller is unplugged and powered off.

2. Apply the parking brake (p. 24).

3. Check for Wheel wobble by grasping the Tire/Wheel Assembly and

attempting to move it side-to-side (Figure 47). The Tire/Wheel

Assembly should not move laterally.

4. If you detect Wheel wobble, check the Wheel nuts and tighten if

necessary using the supplied wheel nut key. Torque the wheel nuts

to 55N-m(40ft-lbf).

Figure 47: Checking the Tire/Wheel Assembly for Wobble

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 91 92

No comments

Segway SE-3 Patroller User Manual Page 61