Segway SE-3 Patroller User Manual download pdf (Page 26)

Rider Controls (cont.)

Brakes

The Left brake lever actives the Front brake. The Right brake lever activates

the Rear brakes (Left = Front, Right = Rear). See "Riding: Slowing/Stopping

the SE-3 Patroller" (p. 36) for information on how to properly use the brakes

while riding. See "Checking the Brake Fluid Level (Front/Rear)" (p. 65) for

information on checking the level of brake ﬂuid in the brake ﬂuid reservoirs.

Parking Brake

Engage the Parking Brake by pushing down on the metal cap while ﬁrmly

squeezing the Rear brake lever (see Figure 11). Ensure the cap is pushed

down completely, fully seated, then release the Rear brake lever. To release

the Parking Brake, give the Rear brake lever a ﬁrm squeeze; the cap should

automatically disengage and return to a level position.

Switchgear

DRIVE/STANDBY Switch

Set the DRIVE/STANDBY switch to DRIVE ( ) to activate the SE-3 Patroller's

drive system (see Figure 12). Set the switch to STANDBY ( ) to disable the

SE-3 Patroller's drive system. When the SE-3 Patroller is in STANDBY mode,

all other electrical systems are enabled, including the lights, horn/siren, and

User Interface.

WARNING

Always set the DRIVE/STANDBY mode switch (p. 24) to STANDBY when the

vehicle is not being driven.

Figure 11: Engage the Parking Brake

Squeeze...

...then push.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 91 92

No comments

Segway SE-3 Patroller User Manual Page 26