Segway SE-3 Patroller User Manual download pdf (Page 52)

Figure 39: Verify the Charge Port is clean, dry, and free of debris

Charge Port

Charging the Battery Module

WARNING

Do not insert the Power Cord plug if the Charge Port, Power Cord, or AC Power

outlet is wet.

To charge the Battery Module:

1. Park the SE-3 Patroller in a clean, dry place, within the recommended

charging temperature range (p. 47).

2. Verify that the Charge Port, Power Cord, and AC Power outlet are

clean, dry, and free of debris (Figure 39).

3. Plug one end of the Power Cord (provided with the vehicle) into a

grounded AC outlet (100V–240V; 50Hz–60Hz). The Power Cord

should be properly grounded (Figure 40).

4. Plug the other end of the Power Cord into the Charge Port.

5. Verify that the Battery Discharge Indicator (BDI) lights conﬁrm the

Battery Module is charging (see Table 5). For more information on

the BDI lights, see p. 51.

IMPORTANT:

You must keep the SE-3 Patroller plugged into a grounded AC outlet when it

is not in use. If you do not plan to use it for an extended time, visit the vehicle

every month and remove and reinsert the power cord to ensure the charging

system is working properly.

Figure 40: Plug into a properly grounded AC outlet

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

No comments

Segway SE-3 Patroller User Manual Page 52