Segway x2 SE Turf User Manual download pdf (Page 100)

Maintaining Tires and Wheels

WARNING

The tire pressure stated on afﬁxed Wheel labels supersedes any recommended pressure stated on the Tires. Higher pressure reduces suspen-

sion performance and traction, and increases risk of loss of control, collisions, and falls. Lower pressure reduces range and increases risk of

damage to the Tire/ Wheel Assembly. Unequal pressure causes the Segway PT to turn in the direction of the lower pressure tire.

To ensure safe and efﬁcient operation of your Segway PT, be sure to check Tires and Wheels regularly, especially if you have recently performed

service on a Tire/Wheel Assembly.

Checking the Tire/Wheel Assembly

To check the Tires and Wheels:

1. Make sure the PT is unplugged and powered off.

2. Check for Wheel wobble by grasping the Tire/Wheel Assembly and attempt to move it side-to-side. The Tire/Wheel Assembly should

not move laterally. If you detect Wheel wobble, check the Wheel nut and tighten if necessary.

For additional information regarding service procedures for the Tire/Wheel Assembly, see "Install the Tire/Wheel Assembly" (p. 109, 111).

TireInationPressure

The Tires on the PT provide suspension and traction. Both functions are affected by tire inﬂation pressure. Be sure to:

1. Make sure the PT is unplugged and powered off.

2. Check tire inﬂation pressure regularly (see "Checking Tire Inﬂation Pressure," p. 107). Improperly inﬂated Tires will result in less than

optimal range.

3. If tire inﬂation pressure in either Tire is not at the level stated in the "Segway PT Speciﬁcations" (p. 12) for your PT model, inﬂate the

Tire to the speciﬁed pressure.

4. Check that both Tires are inﬂated equally and are free of debris or contaminates.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 147 148

No comments

Segway x2 SE Turf User Manual Page 100